Have you ever tried to fold a fitted sheet? If yes, were you successful in the first go? Well if, you were, then it is good for you and that means you hold masters in this job. Well, if you failed to achieve the task at the once then this article is definitely helpful for you. Here we have listed an all the steps to fold a fitted sheet that too without messing with the sheet and wasting time.
Steps to Fold Fitted Sheet:
1.) Hold the Sheet in Your Hand to Fold a Fitted Sheet
The first step to fold a fitted sheet is hold the sheet or bedsheet lengthwise in your hands. Tuck the ends of the sheets in your fingertips from both the side. In law men language, you’re both the hands should be inside both the ends of the fitted sheet. Make sure the fitted sheet is even on both the corners that you have not folded. The tag side of the fitted sheet should be away from your body in order to fold a fitted sheet.
2.) Fold the Corner and Grab Another Corner
After completing the first step to fold fitted sheet, fold the corners of the fitted sheet over each other. For this bring your fingertips together and flip one corner of the fitted sheet over another corner of the sheet. Then switch the side of sheets by facing right-side out. By now both the corners of the sheet must be in your both hands respectively. Then hold another corner. There must be small loop of the edge on the side of the arm and long side of the arm must be at other side. Now put your fingers into the hem of the sheet in such a way that it touches your arm. You should hold the lower corners by now. Follow this at the bottom of the seam until get a hold on another corner of the fitted sheet.
3.) Tuck the Corners and Hold Final Corner to Fold a Fitted Sheet
By now whatever section of the fitted sheet that you have in your both the hands, tuck them under the first two corners of the sheet. By doing so check the right side of the sheet will touch the insides of the corners that you have been holding. Now it is time to grab or hold the final corner. At this point of time all the corners that you have been holding must be folded altogether except one comer that you will fold in the next step in order to fold a fitted sheet.
4.) Tuck the Left Corner and Shake the Sheet to Fold a Fitted Sheet
Now it is time to tuck the left-over corner under the rest of the corners lying in your hand so that the wrong side of the sheet touches the inside of all the corners that you have been hold by now. At this point of time your one arm should have a long edge of the sheet and another arm should have shorter side. Hold the shorter side and fold the corner with the free hand. Now jiggle the entire sheet in your hand to straighten it. By now the fitted sheet will be folded in the shape of the rectangle or a square and the L of the sheet will form two different sides.
5.) Smooth the Sheet to Fold a Fitted Sheet
Spread the fitted sheet on the floor or any flat surface. Smooth it out with by caressing your palms over the sheet. To make the sheet lie flat on the surface you have to pleat the fitted corners of the sheet. Smooth it out thoroughly to remove all the wrinkles. Now keep all the corners together and fold the fitted sheet in such a way that it lines up with edges or borer of the fitted sections. This might be in thirds or in quarter. It completely depends on the size of your sheet.
6.) Fold the Fitted Sheet into Quarters or Thirds
The folding of the fitted sheet depends on you and the thickness of the sheet with its size. All you have to do is fold the sheet into quarters or thirds. Now straighten the fold. Straighten and tuck the fabric of the sheet this will prevent the formation of the wrinkles.
7.) Final Step to Fold a Fitted Sheet
This is last step in order to fold a fitted sheet. Keep all the pieces of the sheet together by folding the flat fitted sheet and the cases of the pillow. Then bundle it together in a twine or a ribbon. This will help you to keep your linen closet clean, tidy and spacious too.
Other Way to Fold a Fitted Sheet:
1.) Spread the Sheet to Fold a Fitted Sheet
The first step is to spread the fitted sheet on the flat surface or on the bad. after spreading the sheet hold it lengthwise in your hands and bring the long edges close.
2.) Match the Fitted Corners to Fold a Fitted Sheet
Now match the fitted corners and insert the all the top corners in the bottom corners. Now smooth out the sheet in such a way that all the four corners are tight and the edges are straight.
3.) Tuck Your Hands in the Corners
Insert your hands in each tucked corner. It will look like a puppet by now. Then lift the fitted sheet up and bring you’re both the hands close.
4.) Flip the Tucked Corners to Fold a Fitted Sheet
Now flip the tucked corner on the top of other corner in such a way that all the tucked corners come together at the end.
5.) Lay the Sheet Again to Fold a Fitted Sheet
Now spread the sheet again on the bed surface or bed and stretched the sides. The corners that fitted will get rounded and other two corners will not be smooth like other. Fold these corners over each other in such a way that the fitted sheet makes rectangle or square and is smoothly spread.
6.) Fitted Sheet is Folded
Fold the sheet lengthwise first and then fold it width wise. Straighten it once again and finally your task is complete. We hope you found it interesting.
